It's Wellness Month: Let's Talk About Gas Leaks

Identifying and Responding to Dangerous Gas Leaks

Gas leaks aren’t fun. They’re incredibly dangerous. The dangers of gas leaks multiply when homeowners aren’t aware of how to properly and safely deal with a natural gas leak when they show up. When teaching about gas leaks, professionals want to ensure homeowners understand that professional gas leak detection and repair is the safest way to handle a leak.

In other words, preventing a leak from happening in the first place is the safest route to follow. This is because if a gas leak occurs while the family is asleep, it can be impossible to notice before significant health issues start to set in. it’s also nearly impossible to predict when a gas leak starts and can be hard to detect. Keep reading to learn signs of a gas leak and what to do if one is suspected.

Discussing Gas Leak Symptoms

foul smellsGas leaks are perfect for discussing during wellness month because they affect more than just the home. They affect human health as well. Timing is everything where gas leaks are concerned. The quicker the homeowner spots the gas leak, the better their chances are of everyone walking out of the house alive and well.

Signs of a gas leak include:

  • A higher gas bill
  • Foul smells in the home
  • Headache
  • Fatigue
  • Nausea

Homeowners should also listen for a faint whistling noise. If they start to feel sick and hear this noise, it’s time to evacuate and call in a professional.

Gas Leak? Here’s How To Respond

Homeowners must pay attention to this next part because it could potentially save someone’s life. When homeowners think they have a gas leak, they must evacuate the entire home. Once outside, they should call a professional for help.

This is vital because using a cellphone or other device inside the home could cause an explosion and fire. Similarly, no one should light a flame, turn on lights or use any electricity at all before exiting the house. All of these things could cause an explosion.

Here’s What the Professionals Can Do

gas detectorFor starters, professionals can install gas leak detectors, carbon monoxide detectors, and even 2-in-1 units whenever the homeowner needs them. Every home should have a gas leak detector as a preventative measure against gas leaks and house fires! Gas leaks increase the chances of a house fire tenfold.

If a gas leak does happen, homeowners must have gas leak repair done by a professional as soon as possible. Residents will not be able to return to the home until the gas has cleared, the detector replaced, and the leak repaired.

Knight Plumbing, Inc. Keeps Families Safe

Knight Plumbing, Inc. has 20 years of experience serving its neighbors in Milwaukee, WI, and the surrounding areas. They provide upfront pricing, fast arrival, and expert solutions. Call them today for gas leak detection and repair in Milwaukee, WI.

How to Tell if You Need a Water Softener

How Can Water be Hard?

How can water be described as hard when it is a liquid? The term hard water describes what is happening at the microscopic level. Water is the universal solvent, meaning it tries to dissolve everything it touches. This is especially true of water in nature. Natural water contains minerals that come from natural rock formations. Thus the term “hard water.”

The reason that hard water is undesirable has to do with the fact that water is such a great solvent. The problem arises when people rely on water to dissolve something, like soap, but it is too full of hard minerals to dissolve something else fully. Read on to learn about water softeners and how they deal with hard water in the home. 

What Does a Water Softener Do?

softenerCalcium and magnesium are the two minerals that contribute to hardness in water. When dissolved in water, they become charged particles called ions. Ions are so small that they can’t be filtered through traditional means. That is why water softeners use a process called ion exchange to eliminate these minerals. 

The ion exchange process uses a natural resin to capture calcium and magnesium ions electromagnetically. Over time, this resin captures as many ions as it can hold until it needs to be refreshed. A water softener uses two tanks to accomplish this: one for the resin and one for extremely salty water. Once the resin is fully saturated, the brine water is flushed over the resin to remove the minerals. The result is that a home always has soft water. 

Signs That a Home Has Hard Water

signsWater is good at dissolving other substances but can’t dissolve substances as well when hardness interferes. What are the implications of this concept in everyday life? Think of situations where washing and rinsing are concerned. How can anything get clean if water can’t fully rinse things like soil or soap? The result is: 

  • Dull, dry hair
  • Dry, scaly skin
  • Dingy clothing
  • Water spots on dishes 

In addition to being unable to wash well, hard water tends to deposit its minerals onto everything it touches. This is a potentially harmful situation for the plumbing in a home. The consequences of hard water for plumbing are: 

  • Clogged pipes
  • Faster corrosion
  • The reduced life expectancy of water heaters and plumbing
  • Crusty, white spots on fixtures and showerheads
  • Higher utility bills 

How Whole Home Water Softeners Can Help

The solution to hard water is easy. Whole-home water softeners are specially designed devices that soften the entire water supply of a home. They only require minimal attention every month or so to refill the brine tank with salt. 

Living with soft water offers benefits like:

  • Healthier skin and hair
  • Longer-lasting clothing
  • Reduced plumbing repairs
  • Water heaters and plumbing last longer
  • Dishwashers and clothes washers are more effective at cleaning

About Knight Plumbing, Inc.

Knight Plumbing, Inc. has over 20 years of experience serving the community of Milwaukee, WI, and the surrounding areas. They provide upfront pricing, fast arrival, and expert solutions. Call them today for water softener services in Milwaukee, WI.

3 Easy Ways to Spend Less on the Water Bill This Summer

3 Tips for Saving Money on the Water Bill

Many homeowners turn on their outdoor plumbing devices such as sprinklers, garden hoses, outdoor pools, and fountains during the summer. The additional use of water in the summer for leisure activities and watering the lawn may cause an increase in water bills for homeowners. Here are three easy water conservation tips homeowners can use to save money this summer. 

1. Install Water-Saving Plumbing Upgrades

showerHere are some examples of water-saving appliances and fixtures:

  • Low-flow showerhead
  • Water-saving toilet
  • Smart washers 
  • Aerated faucets 
  • Touchless faucets

Installing a water-saving device can save homeowners hundreds of dollars on water bills annually. Water-saving devices save money and reduce the environmental impact of the home’s plumbing system. There are various kinds of water-saving plumbing upgrades for homeowners to consider. 

New plumbing fixtures are manufactured to be more water-saving than the older models. Low-flow showerheads, low-flow sink faucets, and water-saving toilets use aerated water to create water pressure while using less water. Aerating the water means that the water contains tiny air bubbles. 

There are also smart plumbing devices available on the market, such as smart washers. Smart washers only use the amount of water needed to do the job. Touchless faucets can help homeowners save money on their water bills because they are easy to turn off and on. The convenience of touchless faucets makes it easier to practice water conservation habits while completing tasks like brushing teeth or washing dishes. 

2. What Is the Best Time for Watering the Lawn?

lawnIt is possible to save money while watering the lawn at the right time of day. During a hot summer day, the water from sprinklers or a garden hose may evaporate before the grass can absorb it. The best time to water the lawn in the summer is in the morning when it is still fantastic. 

Watering the lawn is one of the most significant factors that impact rising water bills in the summer. Homeowners can also use watering meters outdoors to track how much water they use to water the lawn daily. When there is a downpour of summer rain, homeowners should use this to their advantage and skip watering the yard that day. 

3. Water Conservation Habits

Here are some examples of water-saving habits:

  • Use a shower timer to limit shower time
  • Turn off the kitchen sink faucet when washing dishes
  • Turn off the bathroom sink faucet when brushing teeth or shaving 
  • Turn off the showerhead when shampooing hair 
  • Be mindful of how much water gets used for daily tasks

Homeowners can do their part to limit their water usage by adopting water conservation habits, such as turning off the showerhead when shaving and shampooing in the shower. Many people mistake leaving their sink faucet running while doing the dishes or brushing their teeth. Going the sink faucet on is a bad habit that harms the environment and sends money down the drain. 

Reducing water usage with each daily task can help homeowners save on their annual water bills. One of the most common habits that waste water is taking long showers, so try taking shorter showers to help save money on utility bills. 

About Knight Plumbing, Inc.

Knight Plumbing, Inc. has over 20 years of experience providing their neighbors in Milwaukee, WI, and the surrounding areas with expert solutions to all their plumbing issues. They offer upfront pricing, fast arrival, and never leave behind a mess. Call them today for plumbing services in Milwaukee, WI.

Spotting a Leak Coming From Underground Plumbing

Secrets to Finding a Hidden Pipe Leak 

April showers bring May flowers, but they can also bring big plumbing problems. After a long winter, as pipes defrost, they become subject to soil movement that can stress them in a big way. 

Hidden water leaks are so common in the spring because:

  • Rain causes topsoil to expand, which stresses pipe joints
  • Heavy clay on top of water lines puts extra pressure on the pipes
  • Water lines that froze during the winter may suddenly burst
  • Shifting topsoil cause foundations to shift, which can damage water lines that run through the slab

Dealing with an underground pipe leak is tough because the source is hidden, sometimes several feet underground. Identifying and repairing a hidden water leak can be difficult, but they can respond effectively once people recognize the signs. Here is a quick guide to spotting underground water leaks and how to get help from a hidden leak repair specialist. 

Signs to Look Out for That Indicate Hidden Water Leaksbill

Studies verify that a huge percentage of water is lost through leaks. A big portion of this water loss comes in the form of leaks from pipes that are hidden underground. Spotting leaks as soon as possible can save homeowners from needlessly wasting money on the water they aren’t using. Some indications of underground water line leaks are: 
  • It may sound like water is running in the house even when no one is using water and no appliance is calling for water
  • Water bills will spike above normal baseline usage
  • Excess water in the yard can cause wet spots that are remarkably lush. Alternatively, the excess moisture can lead to the death of turfgrass. 
  • Water pressure may suddenly decrease and not come back 
  • Floors may seem cold to the touch or moist
  • Musty odors and mold growth may be noticeable indoors or outside

 

Keep an eye on the Home’s Water Usage

Some of these signs may be present, but there is one final test that can confirm hidden water leaks are present. To do this test, shut off the water inside the house. Turning off all faucets and appliances is good, but if there is a cutoff for the entire house, that is better. Once the water in the house is off, check the water meter to see if it is still spinning. If the dial is moving, chances are there is a leak.

If the test is performed correctly, the only place the leak can be coming from is an underground water line that runs between the meter and the house. If a leak is present, proceed to the next step! 

Know When to Call for Professional Leak Detection

 plumber Precise identification is best when it comes to hidden leak repair. A professional will use tools like leak detectors to precisely locate the leak. 

Once the leak is found, they can expose the pipe minimally, allowing enough room for them to work but not extensive damage to the lawn or inside of the home. Repairing these lines sometimes requires digging or other invasive methods. After that, repairs proceed as they normally would. All that is left is to cover the pipe back up and get on with life!

About Knight Plumbing, Inc.

Knight Plumbing, Inc. has been the trusted professional their neighbors in Milwaukee; WI, can count on since 2002. They are highly qualified, respectful, and clean, and all their technicians are background checked to give customers peace of mind. Call them today for water leak detection and repair in Milwaukee, WI.

There's No Better Way To Start Spring Cleaning Than With the Water Heater!

Why It’s Important To Maintain Your Water Heater

As the days get longer and the weather gets warmer, homeowners everywhere roll up their sleeves to work on their spring cleaning. That could mean clearing out the garage, getting the back porch back into barbecuing shape, or doing a deep clean of the whole house, but one task often gets overlooked - water heater maintenance. 

Unfortunately, neglecting water heater maintenance can be more costly and inconvenient than unsightly clutter or cobwebs. This article will explain everything homeowners need to know about water heater maintenance, from why it matters to what it entails.

Why Does a Water Heater Need To Be Flushed?water heater

A water heater needs to be flushed periodically to remove sediment or scale buildup from inside the tank. This sediment is formed when dissolved minerals in the incoming water, such as calcium and magnesium, form into solid particles and settle at the bottom of the tank. 

As layer upon layer of sediment forms, the heat exchanger below will no longer be able to heat the water properly, and small amounts of water trapped beneath the layers of sediment will begin to boil (it can sound like popping from the outside). This can potentially damage the inner tank wall. The presence of sediment can also lead to corrosion of the tank wall, which can mean the end of the entire unit.

Other Important Water Heater Maintenance Tasks

valves

It’s plain to see why flushing the sediment out of a water heater at least once a year is so important, but it’s not the only thing that needs to be done. Other key maintenance tasks include testing the T&P (temperature & pressure) relief valve to ensure it’s functioning properly and checking for leaks on joints, connections, and the tank itself. The anode rod (an anti-corrosion device inside the tank) also needs to be inspected and replaced if it’s in bad condition.

Homeowners can generally perform a few of these tasks themselves with the help of their owner’s manual, but other maintenance tasks are best left to the professionals. Some of the items on a professional water heater service checklist include cleaning the burners, testing electrical systems and safety devices, checking the pilot light for proper function, and inspecting the exhaust vent and gas lines for leaks.

Why Regular Maintenance Is Beneficial

Annual water heater maintenance is beneficial for several reasons. Firstly, routine maintenance helps ensure safety by addressing potential risk factors (i.e., gas or carbon monoxide leaks, faulty relief valves, etc.). Secondly, as touched on above, a clean water heater tank and intact anode rod lower the risk of corrosion and a premature breakdown, thereby extending the unit's life and reducing the likelihood of costly repairs or replacement.

Last but certainly not least, maintenance helps improve the unit’s performance and efficiency, which can save money over the long term and eliminate issues like a lack of hot water or temperature fluctuations. With all of these benefits, it’s easy to see why water heater maintenance should be at the top of this year’s spring cleaning checklist!

About Knight Plumbing, Inc.

Knight Plumbing, Inc. has served its neighbors in Milwaukee and the surrounding areas since 2002. Their licensed and background-checked technicians always arrive on time and never leave homes a mess. Call them today for upfront pricing on plumbing services in Milwaukee, WI.

How To Unclog The Kitchen Sink Drain

Top Drain Cleaning Tricks

boiling waterDrain cleaning and drain clearing are two separate projects. A licensed plumber usually performs drain clearing. Drain cleaning is a practice used on a routine basis after multiple clogs have occurred. 

Drain cleaning is a way to flush out the sink pipes fully. Common reasons for kitchen clogs include grease buildup, hair, and bits of food. Home draining methods can incorporate over-the-counter chemical solutions, boiling water, or a mix of the two. 

Using boiled water is one of the most common ways to clean a drain. It is a simple process that can be done in under twenty minutes. After boiling a pot of water, gently and slowly pour the water directly into the drain. 

Pouring boiling water into the kitchen sink drain can be done once a week to help prevent future clogs. Although this will not usually work for dislodging blockages in the drain, it can make clogs smaller or erode parts of food stuck in the pipe. 

Professional plumbers rarely recommend this method of drain cleaning because while it may be effective, it can cause damage to PVC pipes, causing them to crack over time. Only use this method if the pipes are not PVC.

baking soda

What About Baking Soda and Vinegar?

For tough clogs that have built up over time, a licensed technician can easily clear the drain most of the time, but some DIY methods can work under the right circumstances. The baking soda and vinegar method is popular for efficiency and household availability. 

Minor kitchen sink clogs can be unclogged by the powerful fizz that baking soda and vinegar create. The pressure of bubbles mixed with boiling water can disintegrate food particles to loosen up the clog. 

Before boiling water, the tenant must pour half a box of baking soda directly down the drain and one cup of white vinegar after a few minutes. The water should be boiled after the two ingredients have mixed. The water is then poured into the drain approximately ten minutes later. 

The tenant must wait at least five minutes for the ingredients to activate and disintegrate the clog. After this has occurred, another pot of boiling water can be poured down the drain to clean away any residue. 

Although this is a popular method for DIY drain cleaning, it does not always work for drain clearing. Since the reaction between baking soda and vinegar cannot provide enough pressure for dense clogs, other instruments are usually necessary. For stubborn drain clogs, drain snakes are commonly used for kitchen plumbing emergencies.  

Licensed Technicians Can Always Help

A licensed plumber can use numerous tools to provide professional drain cleaning and clearing services. Hand augers, drain openers, and drain cleaners are just a few products plumbers have to help with. New technology such as pipe cameras are now used for an accurate internal view. By using a camera to dictate where blockages are located, a cable can run through the drain system, effectively destroying clogs. 

Using the right instrument can unclog a drain without causing further damage. Kitchen drain clogs, in particular, should not be neglected for over a day or two. Trying to fix them without a professional can lead to future clogs.

About Knight Plumbing, Inc.

Knight Plumbing, Inc. is a family business that has served the community since 2002. Their highly qualified and background-checked technicians are always on time, respectful, and clean. Call Knight Plumbing, Inc. today for experienced plumbers in Milwaukee, WI.

Learn More About 3 Common Plumbing Tools - Game Show Edition

Get Ready To Play… The Plumbing Game!

Everybody knows that old cliche of the hunky plumber showing up at the door to rescue the homeowner in distress from a plumbing disaster. Of course, there are other less flattering cliches about plumbers, but those are hardly worth mentioning. But while heroic plumbers everywhere undoubtedly deserve the rose-colored image they often get painted with, they wouldn’t be able to save the day without the trusty tools in their belts. So in this article, homeowners will get a chance to draw back the curtain (instead, the toolbox lid) and learn of the mysterious unsung heroes of plumbing repair. 

drainsnakes

Suitor #1 - Drain Augers

First up are the invaluable tools known as drain augers or drain snakes. These are used to unclog drains and remove obstructions from drainage pipes. These typically feature a long, flexible metal coil that can fit down a drain. One end of the ring is generally a corkscrew-like tip. As the wave goes into the drain, it rotates, causing the information to drill into whatever materials block the drain, allowing the plumber to extract them.

A few different drain snakes are designed for a specific purpose. Some rely on a manual hand crank to unwind and rotate the coil, while others use an electric motor. Toilet augers have a bend at the end of the ring to navigate the curved “water trap” below the bowl. Sewer augers measure 50-100 feet and have much longer coils than household augers. They also have special tips designed to cut through tree roots and tough obstructions.

 

Suitor #2 - Wrenches

wrenchesNo plumber’s tool kit would be complete without wrenches, lots of twists. Plumbing work involves many unscrewing and tightening bolts, nuts, and other components. Most people are probably familiar with the classic pipe wrench, the big, long, and heavy-looking wrench (often painted red) with adjustable clamps on one end, typically used for pipe fittings and heavy-duty nuts.

Other wrenches may not be quite as familiar but are still vital. A basin wrench is a T-shaped rod with a small crab claw-like clamp at one end, designed for accessing hard-to-reach hardware in faucet plumbing assemblies. Then there are the even more specialized wrenches, such as faucet keys (used for opening and closing certain faucet valves), garbage disposal wrenches, and shower valve socket wrenches, to name just a few.

Suitor #3 - Safety Gear

Finally, any severe plumber always shows up prepared with personal protective equipment. A focus on safety separates the pros from amateurs, the men and women from the boys and girls. After all, avoidable plumbing-related injuries aren’t very attractive.

Plumbers use wraparound safety glasses or goggles to protect their eyes and gloves of various types to protect their hands from burns, cuts, abrasions, and hazardous materials. They use earplugs or muffs to protect their hearing when using loud power tools. They may even use respiratory protection and hazmat suits in some cases to protect against sewer gases or other harmful pollutants. The real winner is the plumber who puts safety first!

About Knight Plumbing, Inc.

Knight Plumbing has been Milwaukee’s trusted plumbing contractor since 2002. Their clean, courteous, background-checked experts always show up on time in fully-stocked trucks, ready to finish the job. Knight guarantees 100% satisfaction on every job, so don’t hesitate to call for plumbing services in Milwaukee, WI, today!

Winter ready

Make Sure the Home is Ready for the Winter

How to Get the Pipes Ready for the Winter

Preparing the home for the potential for frozen pipes is all part of the experience when it comes to Milwaukee winters. They can be especially harsh, causing pipes to freeze, disrupting water service, and causing massive flooding in a short time. Every precaution should be taken to prevent this from happening. 

This year, before the weather gets too harsh, make sure and take the advice of local burst pipe repair specialists. By getting the home ready for winter, homeowners can have the peace of mind that comes with knowing that no plumbing emergencies will bother them over the winter. 

Check on the Insulation Around Piping

pipe insulation tubesPipe insulation is an important practice to ensure that pipes don’t freeze over the winter. Any line that may be vulnerable to freezing should be insulated, and in extreme cases, heat tape can be added for extra warmth. Pipe insulation is a simple and cheap practice that can save thousands of dollars worth of damage to a home by preventing a flood. 

Vulnerable piping can include:

  • Bathroom piping located in exterior walls
  • Pipes routed through attics
  • Piping in unsealed crawl spaces
  • Irrigation systems
  • Pool and hot tub plumbing

Pipes like these should be insulated to protect them against the cold. Even if vulnerable pipes are insulated, they should be checked periodically to make sure the insulation is in good shape. 

Get the Outdoor Faucets and Plumbing Ready

outdoor spiggot

Outdoor kitchens and wet bars need to be prepared for the winter. With the increasing popularity of these outdoor spaces, special attention must be paid to keep them from succumbing to plummeting winter temperatures. Having a pipe repair company inspect piping and winterize exterior plumbing is a great idea to make sure no problems occur. 

At the very least, homeowners should know how to drain freshwater piping and protect drain piping that may still contain water that could freeze. Local plumbers are a great resource to get the answers from. 

Make the Heater Can Keep Up During the Winter

No home is safe in Milwaukee winters without having a functioning heater or furnace. Heaters and furnaces help protect people from the elements, but they also keep important services like plumbing running in the home. 

Without having a heater maintaining a minimum temperature of around 60 degrees, pipes in a home can still freeze, even if homeowners have never had trouble with pipes freezing in the past. An important step to preventing frozen pipes is having the furnace maintained before winter comes in fully. 

By having the heater looked at by a professional, homeowners can ensure that their plumbing is protected from emergency heating repairs that may also endanger their plumbing. 

About Knight Plumbing, Inc.

Knight Plumbing, Inc. gives personal attention and solutions to their customers. Their technicians offer the best guarantees on parts and labor in the business. Call Knight Plumbing, Inc. for prompt and excellent frozen pipe repair service in Milwaukee.

Water softener

3 Important Signs It's Time To Install a Water Softener

How To Know the Home Has Hard Water

Hard water isn’t just hard on the home’s plumbing system. It is hard on those living within the home too. Water softeners have become a staple within the modern home. It is rare to walk into a home now that doesn’t have a water softener. That is why professionals want to make sure homeowners know all the important signs to look for to know if it is time for water softener installation or replacement in their homes. 

Below is more information on all of the different signs homeowners can notice and feel when they have hard water, as well as what it does to the pipes in the short-term and long term. 

The Visible Signs Homeowners Can Notice

Hard water can lead to a number of different problems for the plumbing system. When it is time to install a water softener, certain signs will start to pop up. If the homeowner knows what to look for, they can spot the signs sooner and have the problem fixed before any other expensive damages ensue. 

Here are some of the signs that it’s time to install a water softener into the home: 

Many homeowners experience these problems and don’t realize it can be attributed to hard water. When left untreated, hard water can cause the plumbing system to experience pressure build-up within the pipes that cause them to leak and burst. It is important that all homeowners have a water softener installed in their homes. 

What Hard Water Feels Likewater

Aside from the physical signs that pop up around the home, there are also several signs the homeowner will experience personally. It is not uncommon for homeowners to notice these signs first since they happen directly to them rather than their plumbing system. 

Some common signs include: 

  • Dry and itchy skin
  • Dry and static-filled hair
  • Stiff and scratchy clothes
  • Irritated sinuses 
  • A film left on the skin after a shower

What Hard Water Does To the Pipespipe

As mentioned above, hard water causes mayhem to the home’s piping system, especially over a long period of time. To put it plainly, the piping system likely won’t last its expected lifespan if the home has hard water because it puts so much stress on the system. 

Here are a few of the things that hard water does to the pipes:

  • Limescale and other mineral build-ups
  • Blockages and clogs 
  • Slow drainage
  • Decreased water pressure
  • Lower water quality
  • Leaking and burst pipes 

Having a water softener installed will eliminate all of the above-stated issues within the home, the pipes, and the people living in the house. Homeowners can’t go wrong when they have a water softener installed by a trusted professional. 

Knight Plumbing, Inc. Works Hard for Their Customers

Milwaukee’s own Knight Plumbing, Inc. always promises quick and prompt service. They also offer upfront pricing because they understand the importance of homeowners knowing what they are paying for. Call today for water softening services!

Family Activities

Independence Day Is for Family Activities

Kitchen Activities Put a Strain on Kitchen Plumbing, Be Ready!

Summertime is when the kids are out of school, and it’s easy to fall into a pattern of just doing nothing. If someone is looking to break this pattern, consider making July 4th a family activity time. There is much more to do together than merely causing small colorful explosions. Games and water activities usually top the list of things to do, but one mustn’t forget that making things together is one of the easiest ways to bond as a family. 

There is very little prep, and there is almost always a job that everyone, even the youngest members, can do. Making snacks and watching movies is another easy activity. Grilling out can easily incorporate all of the above things. 

Treats in Patriotic Colors

Making or baking treats that the whole family can enjoy is an activity that one can enjoy on several levels. Consider making cupcakes! A red velvet mix with white icing and star-shaped sprinkles in red, white, and blue will provide a patriotic and tasty addition to the dinner table.

If this idea seems overwhelming, try making popsicles instead. This activity can be as simple as making a red or blue drink mix and pouring it into an ice cube tray with toothpicks resting on the sides. It can also be as complicated as pouring one color into a popsicle mold and allowing it to freeze and then adding another color and the popsicle handle. 

Crisped rice treats are another easy choice for a patriotic dish with lots of decoration possibilities. Then, let it sit and then use a star-shaped cookie cutter to create stars to stick on popsicles or cake pop sticks. Melt some white chocolate to dip in, and add some red, white, and blue sprinkles.

Movies for the July 4th Holiday

movies

One alternative if a household is feeling less than kitchen crafty is a good old-fashioned movie night. Grab a bowl and a couple of bags of microwave popcorn, and sit back for some of these patriotic favorites:

  • Independence Day: Enjoy rousing speeches from a president and aliens defeated by Will Smith and Jeff Goldblum.
  • Captain America: The First Avenger: Nothing beats a good superhero combined with the heroics of WWII.
  • The Patriot: Mel Gibson and a young Heath Ledger make this movie well worth a watch.
  • Patriot Games: Harrison Ford plays old-school Jack Ryan.

Grilling Out for the 4th

If a family is looking for outdoor activities, then grilling out is the perfect answer. Adults can handle the grill while kids help set out plates, eating utensils, and sides. A host of outdoor games can keep families entertained.

desserts

Cleaning up is the only hassle that comes from any of these tasks. That’s when the fun tends to stop. This is especially true if there are problems with the kitchen plumbing. Life is easy when the water is running both hot and cold, the garbage disposal is grinding well, the drains are free of clogs, and the dishwasher is working. Any of these breaking down can cause the fun to be cut short. The local plumbers are there to keep the summer fun going.

About Knight Plumbing, Inc.

Knight Plumbing, Inc. has been in the business for 19 years and is still going strong. Their upfront pricing and fast service make them the go-to plumber of the Milwaukee, WI area. Contact them to schedule a reliable kitchen plumbing service in Milwaukee today!